SAP100C10 BSV
SAP100C10 BSV
- Hopper Capacity: 8.5 m³
- Engine Power: 168 kW
- Max. Paving Width: 10.2 m
- Max. Paving Thickness: 35 cm
STG140C-10
STG140C-10
- Rated Power: 150 hp
- Max. Operating Weight: 14.28 T
- Max. Operating Weight (Base Machine): 12.60 T
- Drawbar Pull: 83 kN
STG170C-10
STG170C-10
- Rated Power: 173 hp
- Max. Operating Weight: 17.25 T
- Max. Operating Weight (Base Machine): 14.70 T
- Drawbar Pull: 95 kN
SCM1000C-8s
SCM1000C-8s
- Milling Width: 1 m
- Milling Depth: 0-280 mm
- Cutting Teeth No.: 86 pc
- Drive: Belt
SCM1300C-8s
SCM1300C-8s
- Milling Width: 1.3 m
- Milling Depth: 0-280 mm
- Cutting Teeth No.: 102 pc
- Drive: Belt
SCM2000C-10R
SCM2000C-10R
- Operating Weight: 31000 kg
- Engine Power: 503kW Cummins Engine
- Milling Depth: 0~330 mm
- Milling Width: 2000 mm
SCM1300FC-8A
SCM1300FC-8A
- Milling Width: 1300 mm
- Milling Depth: 0 – 320 mm
- Milling Tool Bit Distance: 18 mm
- Rotor Diameter: 1070 mm
STR90C-10 PRO
STR90C-10 PRO
- Operating Weight: 9200 kg
- Module Load (Front/Rear): 4600/4600 kg
- Static Linear Load (Front/Rear): 27.4/27.4 kg/cm
- Rated Power of Engine: 54.6 kW
SSR110C-10 PRO
SSR110C-10 PRO
- Operating Weight: 11,200 kg
- Front Axle Weight: 6,400 kg
- Drum Static Linear Load: 30 kg/cm
- Travel Speed: 0–11 km/h
SPR260C-10 PRO
SPR260C-10 PRO
- Max. Working Mass: 26,000 kg
- Minimum Operating Mass: 18,000 kg
- Max. Single Tire Load: 2.89 t
- Ground Pressure: 200-520 kpa
SABP145
SABP145
- Capacity: 145 TPH
- Preparation Time Reduced by: 15%
- Fuel Efficiency Increased by: 10%
SABP180
SABP180
- Capacity: 160-180 TPH
- Preparation Time Reduced by: 1hr
- Fuel Efficiency Increased by: 10%
SLZ2000
SLZ2000
- Capacity: 160-180 TPH
- Total Power: 783 kW
- Drying Drum: Φ2×9 m
- Fuel: Light oil, heavy oil, natural gas, liquefied gas
